Hot Medical Waste Disposing Machine Burn rate per hour: 250 -300kg/hr

Incinerator should be smokeless, odourless combustion and it should be made by high-quality cast, insulation, and steel plate as well as minimum generation of dust. Moreover the incinerator should be corrosion resistant.

Type	Pyrolytic:- Hot Medical Waste Disposing Machine
Operation Condition	8-16 Hr /day
Controls	Built in data recording
Incinerator /Primary Combustion Chamber	Type: continuous loading
	Capacity/Burn rate per hour: 250 -300kg/hr
	Temperature: 900-1200 ^oC
	Material: External- 3 layers Internal lining: a fire proof material of pre-fired refractory bricks with Aluminium lining, resistant to corrosive waste or gas and to thermal shock
Secondary Combustion Chamber	Type: horizontal/vertical
	Temperature: 1200-1400 ^oC
	Residence time of gases : >2 seconds
	Material External- Low thermal mass insulation 14-30 ^oC Internal lining: a fire proof material of pre-fired refractory bricks with Aluminium nettle lining, resistant to corrosive waste or gas and to thermal shock.
Ash Handling System	Both Automatic and manual removal of Ash. Must ensure removal/treatment of hazardous remnants of ash.
Flue gas treatment system	Capable of treating the flow of flue gas as the incinerator is operating at its maximum capacity
	Auxiliary device: Water level gauge, pressure sensor, PH sensor..etc.
	Auxiliary device: Fuel cut off device
Waste feeding mechanism	Automatic pneumatic/hydraulic waste loading system or conveyor belt , capacity 650-800L at a time
Chimney (Stack)	Type: Vertical type
	height: 7-10 meters
	Material: Fireproof cast, stainless steel
Wet scrubbing system	Vertical sprat tower with baffles or packing inside
Gas emission	Reduction of Pollutant gas SO2, HCL, HF and line particulate
OUTPUT	ASH -Max <5% of original waste size
OUTPUT	GAS- SMOKELESS,ODORLESS
Emission standard	WHO/ European
Test report for emission testing	Must be provided
Product Data sheet/ Catalogue	Must be attached to the ITB
Additional Requirement	– Local agent or branch in Ethiopia – Training for users as well as for EPHI maintenance staff on preventive maintenance – Fuel tanker with a minimum capacity of 2500 litre (made of plastic material with overfill prevention valve ,fuel gauge, lifting eyes) – The bidder should be willing to sign at least a five years’ service and maintenance agreement with the client (EPHI) – The supplier shall arrange by itself lifting equipment and labour needed during the installation, testing and commissioning of the incinerator